Syntax Error 50 and Intermec 4400

Description

When printing serial to an Intermec 4400, I receive an "Internal syntax error 50" message.

Solution

This error may be occurring because the printer is configured to use a media type other than what is actually loaded in the printer.

1. Select File / Printers from Design or one of the Print Modules.
2. Select the 4400 from the list of Configured Printers and click "Connection".
3. Click "Reset to Defaults". The printer reboots.
4. Take the printer offline, then enter the printer menu.
5. Go to Configuration > Label A label is a design area on the computer screen where a label format is created or edited. > Media type and change the media type setting to match what is in the printer.
6. Reset the printer, and try to test print from Design Mode.

If the error is not resolved, it may be due to printer memory corruption. Contact your printer manufacturer for further information.