Options for QuickLabel Devices

If the Family selected is QuickLabel and a specific model is selected, then only options appropriate to that model are displayed. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.

Option	Description	Values
Print Speed	The printing speed in millimeters per second and inches per second. Printing speed is also affected by Quality and other options.	Auto (Default): The printer uses the best print speed, which can change during printing. 50 mm/sec (2 in/sec) 60 mm/sec (2.4 in/sec) 70 mm/sec (2.8 in/sec) 80 mm/sec (3.2 in/sec) 90 mm/sec (3.5 in/sec) 100 mm/sec (4 in/sec) 120 mm/sec (4.7 in/sec) 160 mm/sec (6.3 in/sec) 200 mm/sec (8 in/sec) Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device.
Image Resolution	The Dots Per Inch (dpi) of the images Loftware Enterprise SP creates to send to the device.	150 dpi 300 dpi 600 dpi (Default) 1200 dpi (Kiaro! only)
Quality	Whether to print labels using less ink or with the best possible quality. Note: This option is displayed only if Image Resolution is 1200.	Economy Best (Default)
Enable Auto Cutter	Whether to turn on the automatic cutter.	False: Off (Default) True: On Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device.
Cut At Job End	Whether to cut the label at the end of the job. Note: This option is displayed only if Auto Cutter is selected.	: Off (Default) : On
Cut Interval	The number of printed labels between cuts. Note: This option is displayed only if Auto Cutter is selected.	0 to 65535 labels Default: 0
Text Box Overrun Mode	How Loftware Enterprise SP should respond if the amount of data received for a Text Box field is more than can fit. Tip: If the Text Box Overrun Mode is specified in the job data, that overrides any mode specified in Label Specific Options in Label Design , device options in Devices , or system preferences in System . Otherwise, if specified in Label Specific Options, that overrides device options and system preferences, and if specified in device options, that overrides system preferences.	Allow Overrun: The text continues beyond the bottom of the envelope for the field. For a printed label, as much of the text as can fit on the label is printed. Truncate Data: Text that does not fit is not printed or displayed. The preceding text is printed or displayed. Truncate Data at Paragraph Break: A paragraph that does not fit is not printed or displayed. The preceding paragraph is printed or displayed. Fail Print Job on Overrun: Any print job that includes a Text Box field in which the data received does not fit is failed and is not printed or displayed. Use Global Setting: The value for Text Box Overrun Mode that is set in System is used. (Default)

Option

Description

Values

Print Speed

The printing speed in millimeters per second and inches per second.

Printing speed is also affected by Quality and other options.

Auto (Default): The printer uses the best print speed, which can change during printing.

50 mm/sec (2 in/sec)

60 mm/sec (2.4 in/sec)

70 mm/sec (2.8 in/sec)

80 mm/sec (3.2 in/sec)

90 mm/sec (3.5 in/sec)

100 mm/sec (4 in/sec)

120 mm/sec (4.7 in/sec)

160 mm/sec (6.3 in/sec)

200 mm/sec (8 in/sec)

Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device.

Image Resolution

The Dots Per Inch (dpi) of the images Loftware Enterprise SP creates to send to the device.

150 dpi

300 dpi

600 dpi (Default)

1200 dpi (Kiaro! only)

Quality

Whether to print labels using less ink or with the best possible quality.

Note: This option is displayed only if Image Resolution is 1200.

Economy

Best (Default)

Enable Auto Cutter

Whether to turn on the automatic cutter.

False: Off (Default)

True: On

Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device.

Cut At Job End

Whether to cut the label at the end of the job.

Note: This option is displayed only if Auto Cutter is selected.

Cleared : Off (Default)

Selected : On

Cut Interval

The number of printed labels between cuts.

Note: This option is displayed only if Auto Cutter is selected.

0 to 65535 labels

Default: 0

Text Box Overrun Mode

How Loftware Enterprise SP should respond if the amount of data received for a Text Box field is more than can fit.

Tip: If the Text Box Overrun Mode is specified in the job data, that overrides any mode specified in Label Specific Options in Label Design , device options in Devices Devices , or system preferences in System System Management . Otherwise, if specified in Label Specific Options, that overrides device options and system preferences, and if specified in device options, that overrides system preferences.

Allow Overrun: The text continues beyond the bottom of the envelope for the field. For a printed label, as much of the text as can fit on the label is printed.

Truncate Data: Text that does not fit is not printed or displayed. The preceding text is printed or displayed.

Truncate Data at Paragraph Break: A paragraph that does not fit is not printed or displayed. The preceding paragraph is printed or displayed.

Fail Print Job on Overrun: Any print job that includes a Text Box field in which the data received does not fit is failed and is not printed or displayed.

Use Global Setting: The value for Text Box Overrun Mode that is set in System System Management is used. (Default)