Media Options for QuickLabel Devices
If the Family selected is QuickLabel and a specific model is selected, then only options appropriate to that model are displayed. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.
Note: For QuickLabel devices, the label template size must match the stock size or the device may exhibit unexpected behavior.
| Option | Description | Values |
|---|---|---|
|
Stock Type |
The printing method used by the device. |
Continuous: No gaps or separations between labels. Note: When printed, space between labels may still occur due to the minimum margins imposed by the device. Gap: Gap, perforation, or separation between each label (Default). Mark: Black line or mark on the label stock backing. Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device. |
|
Media Type |
The type of paper or label stock being used by the device. |
Other (Default) Satin Synthetic Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device. |
|
Gap Length |
The length of the gap, perforation, or separation between each label. Note: This option is displayed only if Stock Type is Gap. |
1200 dpi: 118 to 448 dots 600 dpi: 59 to 224 dots
Default: 118 dots |
|
Mark Length |
The length of the black line or mark on the label stock backing. Note: This option is displayed only if Stock Type is Mark. |
1200 dpi: 141 to 472 dots 600 dpi: 70 to 236 dots
Default: 141 dots |
more