Custom Commands for Printronix Devices

If the Family selected is Family Driver and the Model selected is PGL Printronix Graphics Language, a printer language from Printronix., or if the Family selected is Printronix, then the Custom Commands tab displays the following options. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.

Custom commands are sent even if Send Device Options is cleared in the Advanced tab.

Command Location

You can configure custom PGL commands to occur in specific locations within the job.

Option	Description
Before Label	Command to occur as the first command sent to the device at the start of the job. On an extended print job (multiple label requests in print stream), this command occurs only before the first label request.
After the ~CONFIG Command	Command to occur after the configuration part of the print stream.
After Label	Command to occur as the last command sent after each label.

Note: For more information about PGL, see Printronix documentation.