DevicesOptions for NOVEXX Solutions Devices

If the Family selected is Family Driver and the Model selected is EasyPlugClosed EasyPlug, a printer command language by NOVEXX Solutions. NOVEXX Solutions originated from Avery Dennison's Industrial Paint & Apply (IPA) line of business., then the Options tab displays the following options. Some options may not be relevant to some device models.

If the Family selected is NOVEXX Solutions or Avery Dennison and a specific model is selected, then only options appropriate to that model are displayed. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.

Label Control

Option Description Values

Device Resolution

The resolution capability of the device in Dots Per Inch (dpi).

Note: For thermal printers, setting the resolution to something other than what is reported by the device may result in unexpected behavior.

203 (Default)

300

600

X Offset

Horizontal distance to shift the label template to fine tune its position when printed on the media. A positive value shifts the position of the label template to the right, a negative value to the left.

-9999 to 9999mm

Default: 0mm

Y Offset

Vertical distance to shift the label template to fine tune its position when printed on the media. A positive shifts the position of the label template upward, a negative value downward.

-9999 to 9999mm

Default: 0mm

Text Box Overrun Mode

How Loftware Enterprise SP should respond if the amount of data received for a Text Box field is more than can fit.

Tip: If the Text Box Overrun Mode is specified in the job data, that overrides any mode specified in Label Specific Options in Label Design Label Design, device options in Devices Devices, or system preferences in System System Management. Otherwise, if specified in Label Specific Options, that overrides device options and system preferences, and if specified in device options, that overrides system preferences.

Allow Overrun: The text continues beyond the bottom of the envelope for the field. For a printed label, as much of the text as can fit on the label is printed.

Truncate Data: Text that does not fit is not printed or displayed. The preceding text is printed or displayed.

Truncate Data at Paragraph Break: A paragraph that does not fit is not printed or displayed. The preceding paragraph is printed or displayed.

Fail Print Job on Overrun: Any print job that includes a Text Box field in which the data received does not fit is failed and is not printed or displayed.

Use Global Setting: The value for Text Box Overrun Mode that is set in System System Management is used. (Default)

Cutter Options

Option Description Values

Send Cut Command

Whether to include a Cut command in the print stream after the current label is printed.

: The Cut command is not sent.

: The Cut command is sent. (Default)

Cut Interval

Specify the number of pages after which to send a Cut command.

Note: This option is configurable only if the Send Cut Command option is selected.

0 to 9999 pages

Default: 0