Custom Commands for NOVEXX Solutions Devices
If the Family selected is Family Driver and the Model selected is EasyPlug
EasyPlug, a printer command language by NOVEXX Solutions. NOVEXX Solutions originated from Avery Dennison's Industrial Paint & Apply (IPA) line of business., or if the Family selected is NOVEXX Solutions or Avery Dennison, then the Custom Commands tab displays the following options. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.
Custom commands are sent even if Send Device Options is cleared in the Advanced tab.
Command Location
You can configure custom EasyPlug commands to occur in specific locations within the job.
Note: When using EasyPlug, the Interface Activation (#!A1) command turns on EasyPlug emulation so that incoming data can be interpreted as EasyPlug commands. Print jobs must be started with the End of Run Information (#ER) command and ended with the Print Quantity (#Q) command.
| Option | Description |
|---|---|
|
After #!A1 |
Command to occur immediately after the Interface Activation (#!A1) command. |
|
Before #ER |
Command to occur immediately before the End of Run Information (#ER) command. |
|
After #ER |
Command to occur immediately after the End of Run Information (#ER) command. |
|
Before #Q |
Command to occur immediately before the Print Quantity (#Q) command. |
|
After #Q |
Command to occur immediately after the Print Quantity (#Q) command. |
Note: For more information about EasyPlug, see NOVEXX Solutions documentation.