Media Options for NeuraLabel Devices

If the Family selected is NeuraLabel and a model is selected, then the Media Options tab displays the following options. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.

Option	Description	Values
Media Type	The type of paper or label stock being used by the device.	Plain Paper (Default) Synthetic Label Matte Label Glossy Label Photo Inkjet Paper Matte Inkjet Paper Glossy Inkjet Paper Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device.
Paper Source	The tray from which to draw media and whether the media is continuous (no gap, perforation, or separation between labels) or in sheets.	Tray 1 Continuous (Default) Tray 1 Cut Sheet Tray 2 Cut Sheet Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device.
Marks	Whether the label stock has a line or mark on the back of the label stock. Note: This option is not configurable.	Marked (Default)
Mark Adjust	How far to adjust where a label is printed. This option is typically used if the mark is in the wrong position because the media does not match the current specification.	-30 to 300mils Default: 20mils
Rotate 180 Degrees	Whether to print a label at its normal rotation or rotated 180 degrees. Note: This option is available only if Paper Source is set to a value other than Tray 1 Continuous. Note: The Print Rotation option can also affect rotation. For more information, see Options for NeuraLabel Devices.	: Print the label at normal orientation. (Default) : Print the label rotated.