Options for Intermec FP/DP Devices
If the Family selected is Family Driver and the Model selected is FP/DP
Fingerprint/Direct Protocol. Intermec Fingerprint is a programming language for printer applications. Intermec Direct Protocol is a label layout language used by Fingerprint., then the Options tab displays the following options. Some options may not be relevant to some device models.
If the Family selected is Intermec and a Fingerprint/Direct Protocol (FP/DP) model is selected, then only options appropriate to that model are displayed. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.
Label Control
| Option | Description | Values |
|---|---|---|
|
Device Resolution |
The resolution capability of the device in Dots Per Inch (DPI). |
203 (default) 300 406 |
| Start Adjust | The length of media in dots to feed out (positive value) or pull back (negative value) before printing begins. |
-9999 to 9999 Default: -85 |
| Stop Adjust | The length of media in dots to feed out (positive value) or pull back (negative value) in addition to the normal media feed after printing ends. |
-9999 to 9999 Default: 0 |
| X-Start | The start of the printable area of the media. |
0 to 9999 Default: 0 |
| Enable Label Taken Sensor | Whether to detect if a printed label has been removed before the next one is printed. |
False: Ignore label removal. (Default) True: Detect label removal. Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device. |
| Disable Print Key | Whether to turn off the Print key requiring the key to be pressed to print a label. |
False: Turn on the Print key. (Default) True: Turn off the Print key. Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device. |
| Enable Ribbon Saver | Whether to turn on the auto economy feature. If selecting True, it is recommended that you evaluate whether the reduced ribbon use sufficiently offsets the cost of the more frequent use of the motor that may result. |
False: Turn off auto economy. (Default) True: Turn on auto economy. Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device. |
| Enable Clip Option | Whether to permit the printing of a clipped (partial) field if the field would extend beyond the printable area. |
False: Do not allow partial fields. True: Allow partial fields. (Default) Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device. |
| Text Box Overrun Mode |
How Loftware Enterprise SP should respond if the amount of data received for a Text Box field is more than can fit. Tip: If the Text Box Overrun Mode is specified in the job data, that overrides any mode specified in Label Specific Options in Label Design |
Allow Overrun: The text continues beyond the bottom of the envelope for the field. For a printed label, as much of the text as can fit on the label is printed. Truncate Data: Text that does not fit is not printed or displayed. The preceding text is printed or displayed. Truncate Data at Paragraph Break: A paragraph that does not fit is not printed or displayed. The preceding paragraph is printed or displayed. Fail Print Job on Overrun: Any print job that includes a Text Box field in which the data received does not fit is failed and is not printed or displayed. Use Global Setting: The value for Text Box Overrun Mode that is set in System |
Cutter Options
| Option | Description | Values |
|---|---|---|
| Enable Cutter | Whether to configure the label cutter (if present) to cut after printing the number of labels specified by Feed Length. |
False: Do not cut after printing. (Default) True: Cut after printing. Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device. |
| Feed Length |
Number of labels after which to cut. Note: This option is configurable only if Enable Cutter is selected. |
0 to 9999 Default: 0 |