Options for Datamax-O'Neil Devices

If the Family selected is Family Driver and the Model selected is DPL Datamax-O'Neil Programming Language, a printer control language., then the Options tab displays the following options. Some options may not be relevant to some device models.

If the Family selected is Datamax-O'Neil and a specific model is selected, then only options appropriate to that model are displayed. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.

Option	Description	Values
Device Resolution	The resolution capability of the device in Dots Per Inch (dpi).	203 (Default) 300 406 600
Present Distance	The distance for the label to travel at output.	0 to 9999in
Column Offset	Horizontal adjustment of the point where printing begins. This is useful when a single format must be printed on several different types of labels that already have printed information.	0 to 9999
Row Offset	Vertical adjustment of the point where printing begins. This is useful when a single format must be printed on several different types of labels that already have printed information.	0 to 9999
Cutter Engaged	If the device includes the necessary hardware, whether the cutter is turned on.	On/Off
Label Present	The device presents each label and waits for the label to be removed before continuing. If this option is selected, Loftware Enterprise™ SP receives status information from the device indicating that a label is being detected by the sensor, so the device does not print more labels until the printed label is removed.	On/Off
Set Verifier	Whether to enable a verifier if one is available.	True: Enable verifier. False: Disable verifier. Do Not Send Option: No value for this option is sent to the device. Select this value if you want to configure the option at your device.
Set Label Length	If enabled, the label length is sent to the device. The length of the label is the height or width. Whether height or width is used is dependent on print orientation.	On/Off
Text Box Overrun Mode	How Loftware Enterprise SP should respond if the amount of data received for a Text Box field is more than can fit. Tip: If the Text Box Overrun Mode is specified in the job data, that overrides any mode specified in Label Specific Options in Label Design , device options in Devices , or system preferences in System . Otherwise, if specified in Label Specific Options, that overrides device options and system preferences, and if specified in device options, that overrides system preferences.	Allow Overrun: The text continues beyond the bottom of the envelope for the field. For a printed label, as much of the text as can fit on the label is printed. Truncate Data: Text that does not fit is not printed or displayed. The preceding text is printed or displayed. Truncate Data at Paragraph Break: A paragraph that does not fit is not printed or displayed. The preceding paragraph is printed or displayed. Fail Print Job on Overrun: Any print job that includes a Text Box field in which the data received does not fit is failed and is not printed or displayed. Use Global Setting: The value for Text Box Overrun Mode that is set in System is used. (Default)