Options for cab Devices

If the Family selected is Family Driver and the Model selected is cab, then the Options tab displays the following options. Some options may not be relevant to some device models.

If the Family selected is cab and a specific model is selected, then only options appropriate to that model are displayed. For more information about drivers and Loftware Enterprise™ SP, see Managing Devices.

Label Control

Option	Description	Values
Device Resolution	The resolution capability of the device in Dots Per Inch (dpi).	203 dpi 300 dpi 600 dpi
Label Gap	The gap between labels in millimeters.	-120mm to 120mm
Horizontal Offset	Horizontal adjustment of the point where printing begins. This is useful when a single format must be printed on several different types of labels that already have printed information.	-9999mm to 9999mm
Vertical Offset	Vertical adjustment of the point where printing begins. This is useful when a single format must be printed on several different types of labels that already have printed information.	-9999mm to 9999mm
Backfeed Speed	Backfeed (retract) speed of the device before or after a label is printed.	0 to 10 mm/s
Print Mode	The action taken by the device after a label or group of labels has printed.	Tear Off Peel Off Cutter Don't Send
Peel Off Distance	Distance by which to feed the label forward after printing. Note: This option is available only if Print Mode is set to Peel Off.	-150mm to 150mm
Cut Offset	Adjustment to align labels to the cut position. Note: This option is available only if Print Mode is set to Cutter.	-150mm to 150mm
Cut Interval	The number of labels to skip before cutting. Note: This option is available only if Print Mode is set to Cutter.	0 labels to 9999 labels
Perforate	If a perforation cutter is present, whether perforation is enabled. Note: This option is available only if Print Mode is set to Cutter.	On/Off Default=Off
Text Box Overrun Mode	How Loftware Enterprise SP should respond if the amount of data received for a Text Box field is more than can fit. Tip: If the Text Box Overrun Mode is specified in the job data, that overrides any mode specified in Label Specific Options in Label Design , device options in Devices , or system preferences in System . Otherwise, if specified in Label Specific Options, that overrides device options and system preferences, and if specified in device options, that overrides system preferences.	Allow Overrun: The text continues beyond the bottom of the envelope for the field. For a printed label, as much of the text as can fit on the label is printed. Truncate Data: Text that does not fit is not printed or displayed. The preceding text is printed or displayed. Truncate Data at Paragraph Break: A paragraph that does not fit is not printed or displayed. The preceding paragraph is printed or displayed. Fail Print Job on Overrun: Any print job that includes a Text Box field in which the data received does not fit is failed and is not printed or displayed. Use Global Setting: The value for Text Box Overrun Mode that is set in System is used. (Default)