Status Client indicates Critical Failures are accumulating in the General Queue. When the Status Client's File Editor is used to examine the failed jobs, the errors displayed are:
(M4772) ; *PRINTERNUMBER value is not valid! (M4773) The number is outside the key limit!
There are two typical causes of this error:
|You may want to use a panel to highlight important steps.|
The following example shows a scenario where the Printer Seats on an LPS license was recently increased from 20 to 21 seats. The number of Printer Seats can be confirmed by launching Design 32 and then clicking Help > About Loftware Label Manager. This will display the following dialog box which indicates this LPS license contains 21 Printer Seats.
The following image shows that Loftware Printer Number 21 is configured and should be available for use. Note that Printers numbered 22-25 are in the grey Unassigned Range indicating those printer numbers are outside the current Printer Seat limit. Any printer configured in the Unassigned Range must be moved to the Assigned Range, printers 1-21 in this case, in order to be used.
Next, the Status Client was launched, and the topmost level indicates the number of Printer Seats currently available to the running LPS process. The Status Client in this case clearly indicates the number of Printer Seats is at the older value of 20 Printer Seats.
Since the Status Client indicates the running LPS service recognizes only 20 Printer Seats when Design 32 indicates 21, this is an indication the LPS service must be restarted. After the LPS is restarted, the 21 Printer Seats are now shown in the Status Client, indicating the LPS now correctly sees the expected number of Printer Seats.
Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.
Loftware Print Server 7.x and higher
Any supported LPS family product environment
This table provides article information that is visible only to Loftware users.