Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »


When sending a print job to the printer, the LPS Status Client print queue shows this error at the printer:  (M1533) Socket Error (M1558) Connection reset by peer, then the label doesn't print. The LPS Status Client print queue shows this error at the printer:


Typically a network connectivity issue. It usually indicates an error with the print server or printer (internal NIC) connected to the network, as it is the printer that is closing the connection, not the LPS.

An existing connection was forcibly closed by the remote host. This normally results if the peer application on the remote host is suddenly stopped, the host is rebooted, the host or remote network interface is disabled, or the remote host uses a hard close. This error may also result if a connection was broken due to keep-alive activity detecting a failure while one or more operations are in progress.


 Somehow the printer has gone offline or the power was shut off.  Reset the printers and try again. This will usually resolve the problem.

Error rendering macro 'contentbylabel' : parameters should not be empty

Article Number




All supported LPS family product versions.



  • No labels