The directory where print requests are dropped using the File Interface. Can be located on any network drive. Must use UNC path if the directory is not local.
Loftware Print Server Configuration Utility: Directory Setup Tab
Adding a Scan Directory
You are required to first create a folder before you can add it as a scan directory using Windows Explorer.
Simple systems that do not have high throughput requirements can simply use the default of one scan directory.
Do Not Write Data Directly Scan Directories
It is highly recommended not to write data to a file directly in the WDdrop or other scan directories. Writing to a file in a scan directory could cause your job to become orphaned in the OLEBP directory where the corresponding (.lpj) is missing.
(A) Scan Directory Path
The directory where print requests are dropped using the File Interface. Can be located on any network drive. Must use UNC path if the directory is not local. Both your front-end application and the Loftware Print Server (LPS) must have Read/Write access.
Moved to the WDdrop or other Scan Directories
Data should be written into a file in a non-scan directory and then moved to the WDdrop or other scan directory.
Used to locate the scan directory. Recommended to eliminate errors when typing the scan directory path manually. The folder must
(C) Scan For
Specifies the file extension the LPS will look/scan for: .pas, .csv, .bch, .xml
FIFO = First In First Out – if checked, files are processed in order they are received.
Cmd (Legacy) settings. It is NOT used
Identifies the file format the LPS will accept as a valid print request
(E) Assign Directory to Device Section
Allows you assigned a dedicated printer to a scan directory. Used if no print number command in print request. Files dropped with this setting on are sent to the assigned printer. Overrides file printer designation.
(F) Enable Polling Section
LPS remains idle until the OS notifies it the contents of the scanned directory have changed. If enabled, manually sets the Poll interval. (1 second = default). Overrides OS Event File trigger.
Error rendering macro 'contentbylabel' : parameters should not be empty
This table provides information that is visible only to Loftware users.