Skip to end of metadata
Go to start of metadata

Description

After turning the print mode to Cutter in the device options for a Zebra printer, the printer is pausing after each label that is printed. You have to un-pause the printer before it will print the next label. The printer should continue to print without pausing between each label.

Solution

  1. Open Design 32.
  2. Go into File / Devices.
  3. Select the specific Device on the screen.



  4. Select the Options button.

     
     
  5. On the left hand side there is a box called Override Pause Count
    1. Check the box to prevent pausing between each label.



    2. Un-check the box and it uses the default setting on the printer and will pause in between each label.

 This should resolve the pausing issue.

 

Article Number

2014072

Versions

All supported LPS family product versions.

Environment

All supported installation environments.