Skip to end of metadata
Go to start of metadata

Description

Fields on my label(s) are printing at either half or twice the size of their Design Mode display.

Solution

When designing labels in Loftware's Design Mode, the target printer's resolution must match that of the printer you are actually printing to. If it does not, your printed labels do NOT match the display in Design.
To change the resolution of the target printer:

  1. Open your label in design and then select File > Label Setup.
  2. Select the correct resolution from the drop-down list under Target Printer Configuration; click OK.

Article Number

 2009239

Versions

 All versions of Loftware

Environment

All supported installation environments.